MILLING CUTTERS

Milling cutters are rotating cutting tools that are used mainly in milling machines and machining centers. They remove material via movement within the machine, or directly via their own cutting action. Some milling cutters can drill straight down into the material, while others are capable of 45-degree cuts. Cutting tools for roughing and finishing operations are also available.

SINGLE AND DOUBLE ANGLE CUTTERS

Single Angle Cutters are designed for chamfering or beveling parts and are manufactured in Single Right and Left Angle in 45° & 60° Double Equal Angle Cutters are generally used for milling threads, V-grooves, serrations, and other angular surfaces. Double Angle are generally supplied in 45°, 60°, & 90° Included Angle.

Size And Face = Size --> Diameter -> 40 to 400mm


SIDE AND FACE CUTTERS

Side Milling Cutters are supplied in straight and staggered tooth form for light and heavy deep slot operations in steel and in most soft materials.

CYLINDRICAL CUTTERS

The High Speed Steel cutters are used for surface cutting and finishing in all types of materials. Furnished with right or left hand cut, 30° Helix.

SHELL END MILLS

The cutters are used for face and slab milling in all types of materials. Furnished with 30° Helix right or left hand cut in High Speed Steel.

CONVEX CUTTERS

These High Speed Steel cutters are form-relieved for milling concave half circles in all types of materials.

CONCAVE CUTTERS

These High Speed Steel cutters are form-relieved for milling convex half circles in all types of materials.

CORNER ROUND CUTTERS

These cutters are used to produce convex corner radii up to a quarter circle. furnished with form relieved right or left hand cut. Shank type cutters are also available.

METAL SLITTING SAWS

HSS Slitting saws are used for General slotting and sawing applications. Coarse Pitch and Fine Pitch cutters are supplied in Plain tooth, staggered tooth form to give chip clearance.

T-SLOT CUTTERS

Used for opening out the bottom of previously milled slot to form a T-slot. Alternate right and left hand helical flutes, can be had in flatted shank or threaded shank.

WOODRUFF KEYSEAT CUTTERS

Used for cutting the smaller Woodruff Keyseats. Alternate right and left hand helical flutes, can be had in flatted shank or threaded shank.

DOVETAIL CUTTER

Used to produce dovetail slides for machine tool tables, jigs and fixtures. Regularly furnished right hand with 45º and 60º included angle.

ABOUT US

Tool Masters is the leading innovator and manufacturer of a wide range of precision Cutting Tools. Our product quality and range is well supported by ‘State-of-the-art’ machines for manufacture with a strict in-process control. High quality raw material, the best heat treatments and coatings along with personnel experience have always enabled us....

Read more..

ANY QUESTIONS?

If you have any questions regarding our products and services please use the form below and one of our representatives will be in touch shortly.